Instructions for use
Warning: Never use the microwave when it is empty, i.e. when it
does not contain any food.
Look at the diagram and proceed as follows:
1. Plug the appliance into an appropriate electrical socket (see tips
on the last page).
2. To open the door, press the OPEN BUTTON. The inside
lighting of the microwave comes on.
3. Place the container with the food on the plate.
4. Select the function and the cooking time, according to the
description contained in the following sections.
5. Close the door and press the START-Button
6. The microwave starts to function and the screen displays the
remaining operating time.
Setting the clock
1. When you are not using the oven press the CLOCK button until
the numbers start to flash.
2. Enter the hours with the help of the ROTATING BUTTON,
turning it in any direction.
3. Press again the CLOCK button to set the minutes.
4. Enter the minutes with the help of the ROTATING BUTTON,
turning it in any direction.
5. To finish, press the CLOCK button again.
IMPORTANT NOTE: To hide the clock, briefly press the
CLOCK button. To show the clock again, repeat this
procedure.
Safety lock
The safety lock can be activated and deactivated by pressing the
safety lock button for 3 seconds while the microwave is on stand-
by position. When this happen, all the functions are deactivated
and on the screen displays 4 horizontal middle size bars on each
digit and the dots keep flashing.
EN
35