Packing List - Freeman P36VCMSK Instrucciones De Operación

MODEL: P36VCMSK
ELECTRICAL SAFETY
•
The charger's power plug must match the
outlet. Never modify the plug or try to plug
the tool into an outlet that does not match
the plug.
•
Avoid contact with grounded elements
such as metal tables, pipes, ranges or
refrigerators. Contact with these elements
can put you at risk of electrical shock.
•
When operating the tool keep tool away
from wet conditions. Wet tools can cause
electrical shock.
•
Always inspect electrical cord for damage
before and after use. A damaged cord can
cause electrical shock.
TOOL CARE AND USE
•
Know this tool. Read this manual carefully,
learn its applications and limitations, as well
as the specific potential hazards related to
this tool.
•
Always have a firm footing and grip on the
tool to counteract any force that may be
enacted during the operation of the tool.
•
Practice safe working practices and
ensure all relevant legal requirements are
being followed when using this tool.
The tool should not be forced, use the
correct tool for your application. The
correct tool will do the job better and safer at
the rate for which the tool is being used.
•
Before adjusting, changing accessories, or
storing the tool disconnect the tool from
the battery. This will reduce the risk of injury
from the power tool.
•
Check for misalignment or binding of
moving parts, breakage of parts and any
other condition that may affect the tool's
operation. If damaged, have the tool serviced
before using.
•
Many accidents are caused by poorly
maintained tools. Maintain tool with care. A
properly maintained tool will function more
smoothly and prevent binding, making it
easier to use.
•
Do not use the tool for anything other than
its intended use.
04
HTTP://WWW.FREEMANTOOLS.COM
•
Do not use the tool if the trigger does not
actuate properly. Any tool that cannot be
controlled with the trigger is dangerous and
must be repaired.
•
Keep the tool and its handle dry, clean
and free of oil and grease. Always use a
clean cloth when cleaning. Never use brake
fluids, gasoline, petroleum-based products,
or any strong solvents to clean your tool.
•
Never use gasoline or other flammable
liquids to clean the tool. Never use the tool
in the presence of flammable liquids or
gases. Vapors could ignite by a spark and
cause an explosion which will result in death
or serious injury.
•
Do not use the tool as a hammer.
•
Never press the trigger of the tool when it
is not intended to be used.
•
Do not drop or throw the tool. Dropping or
throwing the tool can result in damage that
will make the tool unusable or unsafe. If the
tool has been dropped or thrown, examine
the tool closely for bent, cracked or broken
parts. STOP and repair before using or
serious injury could occur.
TOOL SERVICE
•
Only use accessories that are identified
by the manufacturer for the specific tool
model.
• Use of unauthorized parts or failure to
follow maintenance instructions may
create a risk of injury.
•
Tool service must only be performed by a
qualified repair personnel.
UNPACKING
• This tool has been shipped completely
assembled.
• Carefully remove the tool and any accesso-
ries from the box.
• Inspect the tool carefully to make sure no
breakage or damage occurred during
shipping.
• Do not discard the packing material until you
have carefully inspected and satisfactorily
operated the tool.
• If any parts are damaged or missing, please
call 1-888-669-5672.
1-888-669-5672
MODEL: P36VCMSK

PACKING LIST

• Cordless screwdriver
• 25pc 1" screwdriver bits
• 2" Flat bit
• 2" Philip bit
• Bit extension
• Torque attachment
• Eccentric attachment
• Angle attachment
• Cutting attachment
• Charger
• Tool carrying bag
• Instruction manual
FEATURES
• 5-in-1 Design
• Lithium-Ion Rechargeable Battery
• An Assortment Of 28pc Driver Kits
• LED Work Light
SPECIFICATIONS
Charging Input 100-240V, 50/60Hz
Battery Capacity 1,500mAh
Max. Torque 35 in-lb
Charging Time
60 min
OPERATION
CHARGING THE BATTERY
• To charge the tool, connect the charger to
the correct power source.
• Connect the charger to the charging socket
on the device.
• The battery is fully charged when the battery
indicator changes from red to green.
HTTP://WWW.FREEMANTOOLS.COM
ASSEMBLE / DISMANTLE
THE ATTACHMENT
Before removing or installing the attachments,
ensure the rotation direction switch is in the
neutral middle position. This prevents
unintentional rotating.
Assemble the attachment:
1. Remove the rubber cap from the
tool holder.
2. Place the desired attachment on the tool
and push to lock it into place.
1-888-669-5672
05