Touch Screen - SPC DARK GLOW 10.1 Manual De Usuario

To connect a USB memory or device, connect one end of
the USB-OTG cable supplied with the device and the other
end into the USB device that you want to connect.
NOTE: You may need to use your finger nail or a slightly long object
to help you to insert and remove the card.
The card and USB memory (not included) must be formatted in
FAT32.
TURNING ON / OFF THE DEVICE
Switch on the device by pressing the key
some seconds. This process needs some time, you have to
wait until it finishes.
The first time you power the unit on, a configuration wizard
will appear, follow the steps until the end. Once completed,
the main desktop will be shown, where you can see the
bottom information bar, some shortcuts to different
functions, and the icon to access the menu.
To switch the device off, keep pressing the
some seconds. Press "OK" to confirm.
Next time you power it on, the device will go to locking
screen, you have to press and move the lock icon
All manuals and user guides at all-guides.com
(3) during
(3) during
to the
28
right position. Then you will see the main desktop, where
you can see the bottom information bar, some shortcuts to
different functions, and the icon to access the menu.
NOTA: To activate the power saving mode and lock the screen,
press the (3) key once. The screen will switch off but the
device will continue powered on. To activate it again, press once
again the key (3) and then, move with the finger the lock
icon to the right posistion.
If at any time the device does not work correctly or if it gets blocked,
insert a sharp object and press the switch inside, a small hole (10).

TOUCH SCREEN

Select a function, option, etc: to select an option, just
press on it.
Move through a list: when you see in the screen a list
of items (folders, files, sub-menus, etc.), you can move
through the list by moving the finger from up to down
and vice versa.
Select an item from a list: just press once on it.
29
EN