Vuzix iWear AV310 Guia Del Usuario página 7

On Screen Display (OSD) Menu
With the AV310
turned on, press the Power/OSD
button to access the OSD for
adjusting display settings.
Repeat presses
Power/OSD button
through each of the options,
finally exiting the OSD.
The first icon in each menu line
is a label only and has no effect
on the eyewear's display settings.
option, "Z1", enables poorly encoded 16:9 video to be displayed correctly. This
setting also enables 4:3 content to be viewed without black pillarbars on either
end, though some cropped may occur along the top and bottom when 4:3
content is displayed in this manner.
"Z1" will not be available when the video eyewear is configured for 3D content.
With the Aspect Ratio menu selected, press the "+" or "-" Control Buttons to
change selections.
Control Buttons to adjust s
to adjust the level of contrast
press the "+" or "-" Control But
choose from 2D video support or one of three 3D video modes. With this menu
selected, press the "+" or "-" Control Buttons to select the video format
appropriate for the video content you are watching.
Select 2D for viewing all video content that is not 3 dimensional.
Widescreen
of the
cycles
creen brightness.
.
tons.
English – 7 of 12
The AV310 Widescreen supports
4:3 and 16:9 Aspect Ratios. A third
With the Brightness
selected, press the "+" or "-"
With the Contrast menu selected,
press the "+" or "-" Control Buttons
Hue adjusts the color or shade of
colors displayed. To adjust hue,
Press the "+" or "-" Control
Buttons, with the Saturation menu
selected to increase or decreas
color intensity.
The 3D menu allows you to
menu
e