Publicidad
OPERATING INSTRUCTIONS
0.- Plug in the machine (switch must be in "OFF" position).
1.- Switch on the machine (select "FOR" position).
Positions in (F): OFF – Stop
Use the soft shaft of 30 mm to clear the pipe and the obstruction.
2.- Introduce the spring (A) by hand into the pipe until it stops (obstruction zone). Select an
appropriate drill and securely connect it to the soft shaft (E). Push the drill along slider slot of the
shaft to engage. This makes connection more reliable, easy and fast. To remove the soft shaft,
insert the key and push the shaft with both hands in direction opposite to the T slot of the
terminal to remove the shaft. It saves time and manpower.
3.- The handle (B) has 2 positions:
- rest position: allow to advance and go back the soft (use always the
protection gloves).
- pressed: the spring will start turning and will clear the obstruction zone.
4.- Steps 2 and 3 must be followed until the pipe is totally clean.
ELECTRIC PIPE CLEANER 50-200 mm
FOR – Forward rotation
REV – Reverse rotation
Publicidad
