Homak RD00803180 Guía De Utilización Y Directivas De Funcionamiento página 3

OPERATION:
1. Fill unit with water-based solvent just below the level of the parts shelf
before plugging into the electrical outlet.
2. Carefully follow degreaser manufacturer's instructions.
3. Open top lid and place parts on removable tray (maximum load
capacity is 66 lb).
4. Position the adjustable nozzle over the parts.
5. Turn the power switch to the ON position.
6. Clean parts as needed.
7. When finished, turn switch to OFF position.
8. Clean up work station.
9. Fusible link must be replaced if triggered.
10. Unplug compressor and drain unit when not in use.
MAINTENANCE:
Powder Coat Finish
For heavy build-up of dirt and grime, our powder coat paint finish can be
cleaned with spray wax. Lightly spray the wax on the surface, and gently
wipe with a soft, dry microfiber cloth.
Window cleaner and a soft cloth dampened with water can be used to
clean the finish on a regular basis.
Customer Satisfaction
All mechanical parts are inspected and adjusted for proper use before
shipment; however, there may be some shifting of parts during transit.
Should any item not operate correctly, please call customer service at
1-800-874-6625.
PUMP: 120V, 60Hz - 1/2 gpm flow
DIMENSIONS: 17 3/8" x 14 1/4" x 8 3/4"
FLEXIBLE METAL SPIGOT: 13 3/4" flexible nozzle
- 3 -