Handle Assembly - Homak Professional BK07062400 Guía De Utilización Y Directivas De Funcionamiento

1 2
3 4
5 6 7

HANDLE ASSEMBLY

1) Slip handle into place on the metal bracket.
2) Hold bracket in place so that the bracket holes are aligned
with the pre-drilled holes on either side of the top chest.
3) Use the provided hardware to attach the handle to the the
bracket.
4) Do not over tighten screws, doing so can strip the threads
on the mounting nut.
MAINTENANCE
Powder Coat Finish
For heavy build-up of dirt and grime, our powder coat paint
finish can be cleaned with spray wax. Lightly spray the wax on
the surface, and gently wipe with a soft, dry microfiber cloth.
Window cleaner and a soft cloth dampened with water can be
used to clean the finish on a regular basis.
Customer Satisfaction
All mechanical parts are inspected and adjusted for proper use before shipment; however,
mechanisms such as drawer slides and locks may shift during transit. Should any of these
items not operate correctly, please call customer assistance at 1-800-874-6625.
- 3 -