Safety Instructions - NEO BLINDER MKII Manual De Usuario

2. SAFETY INSTRUCTIONS

1.
The products referred to in this manual conform
to the European Community Directives and are
there- fore marked with .
2. The unit is supplied with hazardous network
voltage (230V~). Leave servicing to skilled per-
sonnel only. Never make any modifications on
the unit not described in this instruction manual,
otherwise you will risk an electric shock.
3. Connection must be made to a power supply sys-
tem fitted with efficient earthing (class I appliance
according to standard EN 60598-1). It is, moreo-
ver, recommended to protect the supply lines of
the units from indirect contact and/or shorting to
earth by using appropriately sized residual current devices.
4. The connection to the main network of electric
distribution must be carried out by a qualified
electrical installer. Check that the main frequency
and voltage correspond to those for which the
unit is designed as given on the electrical data label.
5.
This unit is not for home use, only professional applications.
6. Never use the fixture under the following conditions:
- in places subject to vibrations or bumps;
- in places with a temperature of over 45 °C.
7. Make certain that no inflammable liquids, water or
metal objects enter the fixture.
8.
Do not dismantle or modify the fixture.
9.
All work must always be carried out by a qualified
technical personnel. Contact the nearest sales
point for an inspection or contact the manufacturer directly.
10. If the unit is to be put out of operation definitvely,
take it toa local recycling plant for a disposal which
is not harmful to the environment.
WARNING AND INSTALLATION PRECAUTIONS
•
If this device will be operated in any way different
to the one described in this manual, it may suffer
damage and the guarantee becomes void. Further
more, any other operation may lead to dangers like
short circuit, burns, electric shock, etc.
•
Before starting any maintenance work or cleaning
the projector, cut off power from the main supply.
•
Always additionally secure the projector with the
safety rope. When carrying out any work, always
comply scrupulously with all the regulations (par-
ticularly regarding safety) currently in force in the
country in which the fixture's being used.
•
Install the fixture in a well ventilated place.
•
Keep any inflammable material at a safe distance
from the fixture.
•
Shields, lenses or ultraviolet screens shall be
changed if they have become damaged to such an
extent that their effectiveness is impaired.
•
The lamp (LED) shall be changed if it has become
damaged or thermally deformed.
•
Never look directly at the light beam. Please note
that fast changes in lighting, e.g. flashing light, may
trigger epileptic seizures in photosensitive per-
sons or persons with epilepsy.
•
Do not touch the product's housing when operat-
ing because it may be very hot.
P. 3
NEO BLINDER MKII
ENGLISH VERSION