Bialetti SPR04 Instructiones De Uso página 20

EN
• Put the appliance on a fl at, smooth and stable surface. Do not put it
close to/on hot surfaces as heaters, cooking hobs, fl ames and similar;
furthermore, avoid the contact with easily fl ammable objects, as
curtains, cloths, paper, etc.
• Before connecting the appliance, make sure the label data correspond
to the mains. The tag is located on the bottom of the appliance body.
• If the plug does not fi t into the wall outlet, have the wall outlet replaced
with another type by a qualifi ed electrician. He/she must also check that
the cord is suitable for the power absorbed by the appliance. In general,
it is not advisable to use an adaptor, multiple socket or an extension
cord. If they are necessary, use only simple or multiple adaptors and
extension cords that conform to safety regulations, being careful not to
exceed the load limits indicated on the adaptor and the extension cord,
and the maximum power indicated on the multiple adaptor.
• Do not leave the appliance connected when not in use. Remove the plug
from the mains outlet when the appliance is not used.
It is recommended to power the appliance through a residual current
device (rcd) with a max. operating current of 30 mA.
Avoid unplugging the appliance by pulling the power cord.
While in use, the power socket must be easily reachable in case it is
necessary to unplug the appliance.
To prevent the appliance overheating, do not press the squeezing
cone (1) too much and do not let it work for more than 30 consecutive
seconds for a max. period of 10 minutes. Allow the appliance to rest
for longer operations.
2. Warnings
20