Thermador TCOOKSENSW Guía De Uso Y Cuidado página 5

Remove the protective film from the
2.
silicone patch. Adhere the silicone
patch to the outside of the cookware
in the correct place using the
enclosed template as a guide.
Press down all over the surface of
3.
the silicone patch, including in the
centre.
The adhesive requires one hour to fully
harden. Do not use or clean the
cookware during this time.
Notes
Cookware with the silicone patch
■
must not be left to soak in soapy
water for long periods.
If the silicone patch comes off,
■
attach a new one.
Fitting the wireless temperature
sensor
Attach the temperature sensor to the
silicone patch and align it correctly.
Notes
Make sure that the silicone path is
■
completely dry before attaching the
temperature sensor.
To prevent overheating, the
■
temperature sensor must not be
pointed towards another item of
cookware that is hot.
Remove the temperature sensor
■
from the saucepan after cooking.
Store it in a clean, safe place away
from sources of heat.
Changing the battery
I f the temperature sensor does not light
C h a n g i n g t h e b a t t e r y
up when the symbol is pressed, the
battery is flat.
Changing the battery:
Remove the silicone cover from the
1.
lower section of the temperature
sensor housing and remove both
screws using a screwdriver.
Open the closure of the temperature
2.
sensor. Remove the battery from the
lower section of the housing and
insert a new battery (pay attention to
the correct orientation of the battery
poles).
en
5