Publicidad
Idiomas disponibles
Idiomas disponibles
Programming the timer.
1. Press "Program" once. Program 1 ON appears on the display.
2. Press "hour" and "minute" to set start time, program 1 (24hr clock).
3. Press "day" to set days of the week that program 1 operates. (defaults to mon-sun, i.e. every day).
4. Press "Program" again. Program 1 OFF appears on the display.
5. Press "hour" and "minute" to set finish time, program 1
If you only want your watering system to come on once per day, for the days set in 3 above, stop here.
6. Press "Program" again. Program 2 ON appears on the display.
7. Repeat steps 2 to 5 above for a second watering on the above days, or watering on selected days only.
•
Up to 8 programs may be set from a total of 15 different days-in-the-week configurations.
•
Ensure that the days for the OFF setting are the same as those for the ON setting
•
Ensure that every ON time has an OFF time!!
•
To exit programming press "time" which returns the display to the current time and day
If after pressing "Program" you press "day" repeatedly the following day combinations appear
1
MO
4
TH
2
TU
5
FR
3
WE
6
SA
NB (1) Install with inlet & outlet vertical (2) Bring in before frosts start (3) "Man/Auto" on/off overrides program.
TROUBLE-SHOOTING GUIDE:
If the water does not come on, please check the following:
1.Be sure the faucet/tap is turned on.
2.Check to be sure the batteries are in good condition and are installed correctly.
3.Check to be certain that the frequency and run times are the same as your record.
4.Be sure that the frequency setting is longer than the run time. For example, you cannot set the
frequency at the 1 hour setting and have the run time set for anything over 60 minutes.
7
SU
8
MO WE FR
9
TU TH SA
10
SA SU
11
MO TU WE
12
TH FR SA
-2-
- - : - -
1
ON
mo tu we th fr sa su
20:00
1
ON
- - : - -
1
OFF
mo tu we th fr sa su
20:20
1
OFF
(
see 3 above)
13
MO TU WE TH FR
14
MO TU WE TH FR SA
15
MO TU WE TH FR SA SU
Publicidad
