BOB Gear Travel Bag Instrucción página 2

BOB Gear
®
ASSEMBLING TRAVEL BAG:
1. Remove Bag From Packaging.
(A) Place bag flat on ground or table with
wheels down.
(B) Open Travel Bag top zipper cover.
2. Unfasten Fabric Flaps.
(A) Unfasten the hook and loop of five (5) fabric
flaps along inboard sides of Travel Bag.
(B) Place temporarily on the outside of Travel Bag.
3. Locate Wall Support Panel (Black Plastic Sheet).
(A) Unroll and note orientation of notch at each end.
(B) Orient wall support with notches toward top cover.
(C) Push ends of wall support panel into pockets.
(D) Align and attach the five (5) fabric flaps with
hook and loop fasteners.
NOTE: It is helpful to flex support panels inward
while securing hook and loop fasteners.
USING THE TRAVEL BAG:
1. Prepare Travel Bag.
(A) Open Travel Bag top zipper cover and
fold cover over.
(B) Locate center strap and unfasten
release buckle laying straps outside of bag.
2. Prepare Stroller To Be Placed In Travel Bag.
(A) Remove contents from stroller (occupant
and all contents in cargo basket and pockets).
(B) Remove stroller front and rear wheels.
(C) Fold stroller.
NOTE: Strollers with swivel front wheel, release
swivel lock and rotate fork so that it is angled into
stroller frame.
See stroller user guide for more information.
3. Store Wheels And Attachment Components.
(A) Place front wheel attachment components in
specified pocket inside top cover.
(B) Place front wheel in front wheel pocket and rear
wheels on bottom of Travel Bag.
2
Travel Bag