Novatel Wireless MiFi 5510 Guia Del Usuario página 50

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Preferences
The Preferences page contains the following:
USB Mode — The USB mode menu changes the USB mode to Ethernet over USB or Charge
only.
Charge only — If selected, the MiFi 5510 will only draw power from the USB port. No
communication is possible between your computer and this device when connected
via USB. Note that a standard USB port does not provide sufficient current to power this
device, so the battery will still be depleted.
Ethernet over USB — If selected, an Ethernet (TCP/IP) connection is established between
the MiFi 5510 and your computer. The computer can access the Internet and the Web-
based interface via the USB connection. For Windows XP, drivers must be installed to
enable Ethernet over USB. The link to download and install these drivers is located on the
Home page. If Ethernet over USB is not available, you can still communicate via Wi-Fi.
Automatic shutdown — The Automatic shutdown menu changes the amount of time (After
5 minutes, After 10 minutes, After 30 minutes or Never) that expires before the MiFi 5510
automatically shuts down.
Turn off display — The Turn off display menu changes the amount of time (After 30 seconds,
After 1 minute, After 5 minutes or Never) that expires before the display turns off.
Save Changes — Click Save Changes whenever you make a change to finalize and save the
new setting.
46

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido