Publicidad
Idiomas disponibles
Idiomas disponibles
To install a new rotor, simply place the
●
knob of one side of the rotor in one of the
grommets. Push the opposite tab out and
lower the second wheel knob into the
grommet of the pushed out tab. Release
the tab and the rotor will snap into place.
Use
Hold the carpet sweeper with a firm grip.
●
Assert a little pressure and push back
and forth along the floor.
Cleaning and care
The carpet sweeper can not be cleaned
●
with water or in a dishwasher.
To empty the sweeper,
●
turn it over and press the
'PUSH' markings on the
dust containers to release
the covers.
Shake out the dirt and push the covers
●
back into place.
Clean the bristle brushes with
●
the comb tool.
Wipe the vinyl rotor clean before storage.
●
If the vinyl rotor becomes very soiled,
remove and wash with a mild cleaning
solution and warm water. Let the rotor dry
before reinserting it.
Do not use any abrasive cleaning agents
●
or brushes for cleaning. These can
damage the device.
Store the carpet sweeper in
●
a dry and clean place with
the comb tool clipped onto
the bottom of the handle
and the bracket of the
sweeper.
Disposal
The packaging material is recyclable. Please
dispose of it in an environmentally friendly
manner and take it to a recycling center.
We reserve the right to modify the product, packaging or enclosed documentation at any time in conjunction with our policy of continuous development.
P140027_17042_CarpetSweeper_Fuller_A5_2014_03_21_GB_ES.indd 2
Customer Service:
The Fuller Brush Company, 860 Kaiser Road, Suite D,
Napa, CA 94558, USA
Toll Free phone number: (800) 522-0499 & (888) 280-7707
Internet email: info@fuller.com
21/3/14 11:39 AM
Publicidad
