Leroy-Somer Nidec Field Keypad RTC Instalación Y Conexión página 13

Step 2: Connect the RJ45 keypad cable to the Commander ID300/302 connector.
Size 1 or 2
Step 3: Power on the drive. Make the required application settings with the keypad.
Step 4: Once settings are finalized, power down the drive. Wait 10 minutes then unplug
the RJ45 connector from the drive.
Step 5: Screw the cover again on the drive.
Adhere to the tightening torque (2 N.m for sizes 1 or 2 and 5 N.m for size 3) in
order to avoid damage to the threading and to maintain IP55 protection. Avoid
damaging the seal of the drive cover.
5
Size 1 or 2
Installation and connections
5690 en - 2018.09 / b
Field RTC Keypad
RJ45
2
5
RJ45
2
Size 3
Size 3
13