DeFelsko PosiTector RTR 3D Manual De Instrucciones página 11

Perform a more thorough Hard Reset as follows:
1.
Power down the Gage and wait 5 seconds.
2.
Simultaneously press and hold the
until the Reset symbol
This returns the Gage to a known, "out-of-the-box" condition. It
performs the same function as a menu Reset with the addition of:
- Bluetooth Pairing info is cleared.
- Menu settings are returned to the following:
Units = Microns
Flip Lock = OFF
Sound = Medium
Touch = On
Language = English
NOTE:
Date, Time and WiFi are not affected by either Reset.
2D
Displays a two-dimensional (2D) black and white image of the
replicated surface. When Memory is on, this thumbnail image is
stored with each reading for inclusion into inspection reports.
3D
Displays a low-resolution color three-dimensional (3D) image of the
replicated surface. When Memory is on, this thumbnail image is
stored with each reading for inclusion into inspection reports.
NOTE:
Press the
3D images if the image does not automatically appear on the display.
Sound
Adjusts the volume of built-in speaker (Off, Low, Medium, High).
Flip Lock
Disables the Auto Rotate feature by locking the display in its
current orientation.
Touch
Allows the touch screen functionality to be disabled. All gage
functions can also be controlled using the navigation buttons.
appears.
Battery Type = Alkaline
Backlight = Normal
USB Drive = ON
Auto Sync .net = ON
Bluetooth Smart = OFF
Advanced models only
Advanced models only
navigation button to toggle between 2D and
10
and buttons