Helpful Tips - Comfort Glow CDE4800 Instrucciones De Instalación Y El Manual De Propietario

Helpful Tips:

1) If heater will not turn on, check main power switch. Rear of Appliance.
2) Check air filter, clean as needed.
3) If your room has minimal heat loss, and is closed off to cooler areas you may be able to reduce the cost of
operation by setting the heater to low after the room has reached a comfortable temperature.
4) If remote is lost you can still operate the heater manually.
Do not drag your heater across the room by pulling it by the cord. Store cord on cord wrap when not in use.
5)
6) Use the timer to turn off your heater and save energy
7) Cool Down feature: When the thermostat cycles "off" or when you turn the unit off the fan will continue to run
for a few moments to finish distributing the heat and to cool down the heaters heating elements.
OPERATING INSTRUCTIONS
1. Turn Main Power switch on rear of appliance to On.
2. Start and select working mode
Appliance
Appliance
Turn the heater on by pressing the Power button on the control
panel or by pressing the Heat On/Off button on the supplied
remote control.
Once power is off, heating element will stop working at first. Fan
will prolong working for 3 min to emit plenty of heat inside. This
Remote
mark will indicate running during the 3 min.
Select a heat Mode
Press the HEAT button to toggle between the two heat settings
Auto and High.
Remote
High Mode uses 1500W; Low Mode uses 750W. ECO mode is an
Economic Energy Saving Function. When ECO mode is chosen, the
heater will manage itself from less to more heating power (watts)
in an attempt to maintain a constant warm 68°(20°).
7