Manhattan 158220 Guia De Inicio Rapido página 2

Parallel PCI Card • User Manual
Thank you for purchasing the MANHATTAN
with specifications, go to www.manhattan-products.com.
System Requirements
• Windows 2000/XP/Server 2003/Vista/7 32/64 bit
• 1 available punch-out expansion slot and 1 PCI slot
Driver Installation
IMPORTANT: Driver installation must be completed before card installation.
1. Insert the included driver CD into the computer's CD-ROM drive.
2. On the computer desktop, go to Start, then Run.
3. • For a 32-bit system, enter "D:\PCI_IO\MCS9865\XX\PCISetup32.exe" (replacing "XX"
with your system designation, such as "XP" for Win 2000, XP and Server 2003 or
"Vista32"). Then click "OK. "
• For a 64-bit system, enter "D:\PCI_IO\MCS9865\XX\PCISetup64.exe" (replacing "XX"
with your system designation, such as "XP64" for XP-x64 and Server 2003-x64 or
"Vista64"). Then click "OK. "
4. Click "Install" to install the drivers.
5. Click "Exit" to complete the driver installation.
6. Shut down the computer.
7. Place the PCI card into the PCI slot, then power on the system. Windows will automatically
start installing the driver software.
Verification of Driver Installation
1. Right-click on "My Computer, " then click "Manage" and "Device Manager. "
2. Click on "+" in front of "Ports (COM & LPT)" and confirm that "PCI ECP Parallel Port" is listed.
Card Installation
IMPORTANT: Driver installation must be completed before card installation.
1. Turn off your computer.
2. Unplug the power cord and remove your computer's cover.
3. Remove a slot bracket corresponding to an available PCI slot.
4. Carefully align the card's bus connector with the selected PCI slot on the motherboard.
Push the board down firmly.
5. Replace the slot bracket's holding screw
to secure the card.
6. Replace the computer cover and
reconnect the power cord.
2
English
Parallel PCI Card, Model 158220. For a datasheet
®
English