Installation Instructions; Technical Specifications - PNI ESCORT C180 Manual De Usuario

INSTALLATION INSTRUCTIONS

1. Before drilling the car body, make sure that the
diameter of the drill cutter is equal to the diameter of
the camera (16 mm).
3. Insert the camera wires first and then the camera
CONNECTION SCHEME
Monitor
GND Rear power

TECHNICAL SPECIFICATIONS

Chipset
Resolution
Minimum lighting
Sensitivity
Video output
Waterproof
Functions
Power voltage
Current
Operating temperature
Camera
White
Blue
3
2. Install the camera with the arrow upwards
4. Use both hands to fix the camera
If you are installing the camera on the
back side of the car, it is not necessary
to cut the white wire.
If you are installing the camera on the
front side of the car, you must cut the
white wire to transmit to the monitor the
correctly oriented image.
Cut the blue wire if you do not want
the guidelines to be displayed on the
monitor.
Leave the blue thread uncut if you want
the guidelines to be displayed.
707 CCD
640 x 480 px
0.1 Lux
+50dB
1.0Vp-p/75 (Ω)
IP68
Colored guidelines
9 - 16V
120mA
-26°C ~ + 60°C
EN