Maintenance - Hoover UH74200DI Manual Del Usuario

Maintenance

NOTICE:
A Thermal Protector has been designed into your cleaner to protect it from overheating.
When the Thermal Protector activates, the cleaner will stop running. If this happens proceed as follows:
Dirt Cup Release
Empty Dirt Cup
10
1. Turn cleaner OFF and unplug it from the electrical outlet.
2. Empty the dirt cup.
3. Inspect the nozzle inlet, hose connector, hose, dirt cup inlet, cyclonic filter, rinsable filter and HEPA filter for any obstructions. Clear obstructions if
present.
4. When cleaner is unplugged and motor cools off for 30 minutes, the Thermal Protector will deactivate and cleaning may continue. If the Thermal
Protector continues to activate after following the above steps, your cleaner needs servicing. Refer to the Warranty section in the user manual for
servicing information.
WARNING
To reduce the risk of personal injury, unplug before cleaning or servicing.
Emptying the Dirt Cup
1. Remove the dirt cup by pressing the dirt cup release button.
2. Hold the dirt cup over your trash can and press the dirt cup trap door release to empty the dirt cup.
TIP: Empty the dirt cup after every use to maintain optimal
performance.
WARNING
Do not use vacuum without dirt cup and dry filters.