Numbering Plan; Total Reset - Keo Mini Central K208 Manual Del Usuario

Where:
LINE:
1 for line 1
2 for line 2
EXTENSION:
1 for 601
2 for 602
n for 60n
8 for 608

Numbering Plan

Factory Programming: extension numbers of 601,
602, ..., 608.
This programming is a table that links an extension
number to its physical position, (place in the Mini
Central where the cable connected to the telephone
comes out).
Changing Extension Numbers
In the programmer extension, in programming
mode, press + EXTENSION + XXXX +
wait for the confirmation tone.
Where:
EXTENSION
1 for 601
2 for 602
n for 60n
8 for 608
XXXX: the new extension number can have 1 to
4 digits (number of digits must be the same for
all extensions).
Restoring Extension Numbers
In the programmer extension, in programming
mode, press
extension and wait for the confirmation tone.

Total Reset

This programming allows Mini Central to return to
the factory programming.
In the programmer extension, in programming
mode, press
and
confirmation tone.
in the desired
and wait for the
59