Kohler K-2009 Guia De Instalacion página 4

2. Install the Lavatory
CAUTION: Risk of personal injury or product damage. Handle
with care. Product can break, chip or cause injury if handled
carelessly. Get help lifting the lavatory.
Cut out the countertop opening by carefully following the pencil
line traced from the template.
Temporarily position the lavatory in the opening. Adjust the fit of
the lavatory.
Remove the lavatory from the countertop.
Install the faucet and the drain to the lavatory according to the
manufacturer's instructions.
Carefully position the lavatory in the cut-out.
Apply a thin, continuous bead of sealant around the lavatory
edges. Immediately wipe away any excess sealant.
Fill any voids between the lavatory and the cut-out with sealant.
Verify that the lavatory has not moved out of position.
Allow the sealant to cure for at least 30 minutes before
proceeding.
Connect and tighten the trap to the drain, and complete the water
supply connections to the faucet according to the instructions
packed with the faucet.
Run water into the lavatory and check for leaks.
Clean up with a non-abrasive cleaner.
1018888-2-E
Sealant
4 Kohler Co.