Safety Warnings; Installation Warnings; Description Of The Product - King gates OPEN 4000 Instrucciones Y Advertencias Para La Instalación Y El Uso

1. General warnings
1.1 -

Safety warnings

CAUTION!
- This manual contains important safety instructions and
warnings. Incorrect installation could lead to serious injury.
Before starting, please read all sections of the manual care-
fully. If you are unsure about something, stop installation im-
mediately and contact KING-gates Customer Service for as-
sistance.
- Important: please retain this manual for future maintenance
work and product disposal.
1.2 -

Installation warnings

• Before beginning the installation procedure, check that this prod-
uct is suitable for its intended use. If unsuitable, do NOT proceed
with installation.
The contents of this manual refer to an installation like the one shown
in fig. 2.
• Considering the risk situations that may arise during installation
phases and use of the product, the automation must be installed in
observance of the following warnings:
- Ensure there is a system device which is a means of disconnection
from the supply mains. This device must have a contact separation in
all poles which ensures full disconnection under overvoltage category
III conditions.
- All installation and maintenance operations must be carried out
with the automation system switched off and the power supply dis-
connected. If the disconnection device is not visible from where the
automation system has been installed, a sign must be attached to
it before attempting any work. The sign should read: "WARNING!
MAINTENANCE IN PROGRESS".
- The product must be connected to a power supply line equipped
with safety grounding system.
- Take care not to crush, bang, drop or spill any kind of liquid on the
automation system during installation. Do not keep the product close
to sources of heat or open flames. Doing so may damage it, corrupt
it or lead to hazardous situations. If this were to happen, stop instal-
lation immediately and contact KING-gates Customer Service.
- Do not make alterations to the product in any way. Improper use
can only lead to malfunctions. The manufacturer declines all liability
for damage caused by arbitrary modifications to the product.
- This product is not intended for use by people (including children)
with reduced physical, sensory or mental capabilities or who lack
experience and knowledge, unless they have been given supervision
or instruction concerning the use of the product by a person respon-
sible for their safety.
- The product is not intended as an intruder protection system. If an
efficient protection system is required, the automation must be inte-
grated with other devices.
- Do not allow children to play with the fixed control devices. Keep
remote control devices out of their reach as well.
- The packing materials of the product must be disposed of in com-
pliance with local regulations.
2. Description of the
product
Model Description
OPEN 4000
Automatic boom gate in galvanised, painted
steel with an opening time of 3 to 5 seconds;
maximum net opening is 4 metres.
OPEN 6000 Automatic boom gate in galvanised, painted
steel with an opening time of 5 to 8 seconds;
maximum net opening is 6 metres.
A - Cubicle with 24 V DC gearmotor
Note: OPEN4000
B - Electronic control unit
The standard
C - Connection for bar
supply includes
D - Anchorage base with fish-tail clamps
1
290
220 320
290
320
Table 1
OPEN 4000
Max 4 m.
OPEN 6000
Max 6 m.
420
3