Steren COM-252 Manual De Instrucciones página 35

CONNECTION TO A VIDEOGAME, VIDEOCAMERA OR
OTHER VIDEO APPLIANCES
Follow the previous connections before connect other video device.
If the video source has only RCA connectors, follow these steps:
1.- Plug the RCA cable to the video output jacks in the videogame, DVD
or VCR (remember, the colour of each cable must be the same as the
connectors: yellow = video, white = left audio, red = right audio).
2.- Then plug the end of the RCA cable to the Audio / Video input jacks,
located in the front panel of the converter.
3.- Turn the video device on.
4.- Play a file.
5.- In the remote control press TV/AV button to select AV mode. If you
see an image in the monitor, the installation will be completed.
If the video source has a S-Video output jack, follow these steps:
1.- Plug the S-Video cable and 2 RCA audio cables in the output audio
jacks in the videogame console, DVD or VCR players.
2.- Then plug the end of the cables into the front connectors of the
converter labeled as L-AUDIO-R and S-Video.
3.- Turn the video device on.
4.- Play a file.
5.- In the remote control press TV/AV button to select S-Video (SV)
mode. If you see an image in the monitor, the installation will be
completed.
ENGLISH-12