Página 1
Upholstered Bed with Storage Queen Green Linen Weight Limit: Thank you for purchasing from DHP! Bed: 500 Lb / 227 Kg Drawer: 40 Lb / 18 Kg DO NOT RETURN TO THE STORE ! If parts are missing or damaged, we will gladly ship your replacement parts free of charge.
Warranty Information Read Before Beginning Assembly DHP warrants this product to be free from defects in material and workmanship and Call our toll free number if you need assistance. agrees to remedy any such defect. This warranty covers one year from the date of Work in a spacious area and near where the unit will be used, preferably on a original purchase.
Página 3
Parts Replacement Parts, visit www.dhpfurniture.com/eng/replacement-parts All in 1 big box! There are inner box(es) that include components required to complete this assembly. Before you throw the package, please use the Back Panel Footboard Side Rail Side Rail Headboard Check Box to identify the parts and ensure that T962120 T962440 T953520...
Página 4
Parts Replacement Parts, visit www.dhpfurniture.com/eng/replacement-parts All in 1 big box! There are inner box(es) that include components required to complete this assembly. Before you throw the package, please use the Front Panel Drawer Bottom Panel Drawer Back Panel Drawer Side Panel Check Box to identify the parts and ensure that T962450 T953380...
Hardware Pack Hardware Pack #: T4155429-00 1/4" X 3/4" 1/4" X 3/4" X 12 1/4" X 1 3/16" X 12 1/4" X 1 9/16" 1/4" X 1 9/16" 3/16 X 3/8" 1/4'' 3/16 X 7/8" X 24 3/16 X 1" X 56 Please do not completely tighten all the hardware, until the entire assembly is complete, unless...
Página 6
Step 1 Stick A1 to the back of A with Velcro as illustrated.
Página 8
Step 3 Attach G X 2 to K with Fully tighten all bolts in this Step.
Página 9
Step 4 Attach E and F to G with Don't completely tighten the bolts until STEP 6 is complete.
Página 10
Step 5 Attach E and F to A and B with...
Página 11
Step 6 6.1 Attach I x2 to A and B with , then properly 6.2 Attach I x2 to K with tighten all the bolts. The slat holes should be oriented towards upside.
Página 12
Step 7 7.1 Insert O1 into X , 7.2 Press X into E & F , repeat the same procedure for the opposite side of the bed with a new O1 and X . 7.3 Insert ends of both slats O1 into Y , then press Y into I as illustrated.
Página 13
Step 8 Attach M to S and N with don't completely tighten the bolts until STEP 10 is complete. For better performance, please orient the plastic sheet towards inside of the drawer. Make sure that these holes are all located on the top side before assembling X 16...
Página 14
Step 9 9.1 Attach Q to L with 9.2 Attach Q X 4 and L to S and N with 9.3 Attach L to M with X 32...
Página 15
Step 10 Attach sub-assembly L/S/N/M from previous step to C with , then properly tighten all the bolts. X 24...
Página 17
Step 12 Align Drawers with the bed frame and push them into the bed. Lock drawers by slightly lifting drawer and Slot inserting the Pin into the Slot. Slot...
Move your new furniture carefully, with two people lifting and carrying the unit to its new location. Your DHP furniture can be disassembled and reassembled to move. Some parts have been pre-assembled for this item. They are illustrated on this page and available for replacement.
Página 19
Trabaje en un rea espaciosa y cerca de donde su producto ser utilizado, preferiblemente sobre una alfombra o utilice el cart n del empaque para proteger su DHP garantiza que este producto est libre de defectos de f brica en la mano de obra piso y su producto.
Partes Instrucciones Paso 1 Piezas de reemplazo, visite www.dhpfurniture.com/spa/replacement-parts Coloque A1 en la parte posterior de A con el cierre m gico como se ilustra. Paso 2 Una J X 2 con A y B con los Todo se incluye en 1 caja grande! Paso 3 Hay 1 caja(s) interna(s) que incluyen los componentes necesarios para Una G X 2 con K con los...
Página 21
Mueva sus muebles nuevos con cuidado, con dos personas levantando y llevando el aparato a su nueva ubicaci n. Sus muebles DHP se pueden desmontar y volver a ensamblar en caso de mudanza. Algunas partes han sido pre-ensambladas en este producto. Se encuentran ilustradas en esta p gina y disponibles para reemplazo.
Página 22
Travailler dans un endroit spacieux et pr s du lieu o l'unit sera utilis e, pr f rablement sur un tapis, ou sur un morceau de l'emballage pour prot ger le DHP garantit que ce produit est exempt de tout vice de mat riaux et de fabrication et plancher et le produit.
Página 23
Pi ces Instructions tape 1 Pi ces de rechange, visitez www.dhpfurniture/fre/replacement-parts Coller A1 l'arri re de A avec le Velcro, comme illustr . tape 2 Tout dans 1 grosse bo te! Attacher J X 2 A et B avec tape 3 Il y a des bo tes int rieures qui contiennent les composants pour completer l'assemblage.
D placez votre nouveau mobilier avec soin, nous recommandons deux personnes pour soulever et transporter le mobilier vers son nouvel emplacement. Votre mobilier DHP peut tre d mont et reassembl pour faciliter les d m nagements. Certaines pi ces ont t pr -assembl es pour ce produit. Ils sont illustr s sur cette page et disponibles pour le remplacement.