Siemens SIMATIC SM331 Primeros Pasos página 76

T
T
R
m001: NOP
END_ORGANIZATION_BLOCK
ORGANIZATION_BLOCK OB
TITLE = "Hardware Interrupt"
VERSION : 0.1
VAR_TEMP
OB40_EV_CLASS :
(Event class 1)
OB40_STRT_INF :
OB40_PRIORITY :
OB40_OB_NUMBR :
OB40_RESERVED_1 :
OB40_IO_FLAG :
OB40_MDL_ADDR :
OB40_POINT_ADDR :
OB40_DATE_TIME :
END_VAR
BEGIN
NETWORK
TITLE =
L
T
L
T
L
T
NOP
NOP
END_ORGANIZATION_BLOCK
ORGANIZATION_BLOCK OB
TITLE = "I/O Point Fault"
VERSION : 0.1
VAR_TEMP
OB82_EV_CLASS :
Internal fault event
OB82_FLT_ID :
OB82_PRIORITY :
OB82_OB_NUMBR :
OB82_RESERVED_1 :
OB82_IO_FLAG :
OB82_MDL_ADDR :
OB82_MDL_DEFECT :
OB82_INT_FAULT :
OB82_EXT_FAULT :
OB82_PNT_INFO :
OB82_EXT_VOLTAGE :
OB82_FLD_CONNCTR :
OB82_NO_CONFIG :
OB82_CONFIG_ERR :
OB82_MDL_TYPE :
OB82_SUB_MDL_ERR :
OB82_COMM_FAULT :
OB82_MDL_STOP :
OB82_WTCH_DOG_FLT :
Getting Started SM331 AI 8x12bit, parte 2: Tensión y PT100
A5E00264163-01
MW 104;
MW 106;
M 200.0;
0;
40
BYTE ; //Bits 0-3 = 1 (Coming event), Bits 4-7 = 1
BYTE ; //16#41 (OB 40 has started)
BYTE ; //Priority of OB Execution
BYTE ; //40 (Organization block 40, OB40)
BYTE ; //Reserved for system
BYTE ; //16#54 (input module), 16#55 (output module)
WORD ; //Base address of module initiating interrupt
DWORD ; //Interrupt status of the module
DATE_AND_TIME
#OB40_IO_FLAG; // OB40_IO_FLAG
MB 104; //
#OB40_MDL_ADDR; // OB40_MDL_ADDR
MW 106; //
#OB40_POINT_ADDR; // OB40_POINT_ADDR : LB8 = Rebase del
MD 100; //
0; // OB40_POINT_ADDR : LB9 = Rebase por defecto del
0; //
82
BYTE ; //16#39, Event class 3, Entering event state,
BYTE ; //16#XX, Fault identifcation code
BYTE ; //Priority of OB Execution
BYTE ; //82 (Organization block 82, OB82)
BYTE ; //Reserved for system
BYTE ; //Input (01010100), Output (01010101)
WORD ; //Base address of module with fault
BOOL ; //Module defective
BOOL ; //Internal fault
BOOL ; //External fault
BOOL ; //Point information
BOOL ; //External voltage low
BOOL ; //Field wiring connector missing
BOOL ; //Module has no configuration data
BOOL ; //Module has configuration error
BYTE ; //Type of module
BOOL ; //Sub-Module is missing or has error
BOOL ; //Communication fault
BOOL ; //Module is stopped
BOOL ;
; //Date and time OB40 started
: 16#54 = Módulo de entrada
: 16#55 = Módulo de salida
: Dirección inicial del
módulo causante
límite superior
límite inferior
//Watch dog timer stopped module
74