OPERATION
Active functions*
Meat probe connected
Lighting on
Quick pre-heat
ECO active
Kitchen Timer active
Delayed timed operation
Timed operation
Child Lock Active
Oven pre-heat active
Pre-set programme active
* depending on model
Connect the power supply
When you connect the power supply (or
power is restored after a power outage) the
appliance will prompt to set the current time,
will flash on the display. You must set
the current time to use the appliance.
Note: In the event of a power outage, all
settings such as Duration, Temperature and
Heating Function will be lost. You will need
to re-enter the settings to continue cooking.
If the pyrolytic cleaning is interrupted (or the
door is locked for any other reason), the oven
will start the cooling and door opening proce-
dure before you can set the time.
The display brightness.
The LED display brightness varies depending
on the time of day. The display is dimmed
during 22:00 to 06:00 and its brightness is
normal during 06:00 to 22:00. Also, the dis-
46
play is brighter when active than when the
appliance is in Standby mode. The display
brightness and display dimming times cannot
be changed.
Set the current time
When you connect the appliance to the power
supply, the minutes
display. To set the minutes, turn the adjust
setting knob +/– in any direction. Then touch
and turn the adjust setting knob +/– in any
direction to set the hour. Touch
the current time.
To adjust the current time, touch and hold
in Stanby mode and the digits will flash.
Now you can proceed to set the current time.
Lighting
The lighting turns on each time you open the
oven door. The lighting also turns on when
the oven is in active mode. This lighting is off
in Standby mode. If the oven door remains
open for a long time, the lighting will auto-
matically turn off after about 10 minutes.
Cooling fan
Cooling fan operates independently of the
set functions and the appliance mode. The
cooling fan operates as long as the oven
cavity temperature exceeds 50°C. B e l o w
this temperature, the cooling fan turns off.
Oven pre-heat (Thermostat symbol)
The
pictogram indicates that at least one
of the heaters in the oven operates. This pic-
togram goes out when the set temperature
in the oven cavity is reached. Then the pic-
togram will be on and off periodically. This
indicates that the set temperature is main-
tained. If you lower the set temperature,
flash on the
to confirm