Levenhuk MED 5M Guia Del Usuario página 4

Camera display interface
The screen is divided into two parts:
1. The left part is the Preview Image. It displays the current image provided by the camera.
2. The right part is the Tool Panel. It contains a number of tools for image capturing, changing parameters,
measuring, etc. Use the right side of the screen to perform the following actions:
• Effect: Settings of the camera parameters
• Measure: Measuring tool
• Playback: Images and video playback
• Snap: Image capturing
• Record: Video recording
• Setting: Setting and changing parameters
Capturing and playback tools
Press the Snap button to take a photo. Select the image size in the Settings section.
Press the Record button to start video recording. To stop recording, press the same button
once again.
If the original size of the video is smaller than 1080p, then the size of the recorded video will
be the same as the original. If the original size is bigger than 1080p, the recorded video size
will be reduced to a size smaller than 1080p.
Press the Playback button to open the last image captured or to play the last video recorded.
The image will be opened in the Image Analysis window.
4