Connecting To The Network - Worldcast Systems AUDEMAT RDS Guía Rápida

3. Connecting to the network

Before connecting to the network, check the encoder's IP address:
From the main screen, touch the Check button to
display the menu.
Use the arrow to select the System menu and touch
the Check button.
The Network menu is selected, touch the Check
button
Use the arrow to select the Configuration menu and
touch the Check button.
If you need to change the IP address:
• Use the Check button to switch to edit mode
• Use the Left and Right buttons to select the
various groups of digits
• Use the Up and Down buttons or the swipe
around the wheel modify the values
• When the IP address has been modified, use
the Check button to save the new value.
Proceed the same way to change the mask and gateway if necessary.
You may now connect the AUDEMAT RDS ENCODER to the network on the ETH0 port using the
provided Ethernet cable.
4. Configuring the AUDEMAT RDS ENCODER using the embedded website
For remote access, connect to the encoder's embedded web site. Simply open a web browser (Google
Chrome, Mozilla Firefox ...) and enter the encoder's IP address in the address bar (set on the front
panel).

Though the web application is compatible with most browsers, performances vary from one browser
to another. For optimal performances, Google Chrome is recommended.

The browser may display a message indicating that the connection is not certified; however, the site
is secured (data is encrypted) and you may proceed to
access it. To prevent these potential blocking and
warning messages, WorldCast Systems now supplies
certificates for HTTPS browsing, see the user manual for
more information.
Select the language if necessary.
Enter the default user name and password: Admin / admin
English version
5