HoMedics mybaby walkaboutlantern Manual De Instrucciones página 2

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 5
CREATE THE PERFECT ENVIRONMENT FOR YOUR BABY
Thank you for purchasing the MyBaby by HoMedics Walkabout Lantern. MyBaby by HoMedics Walkabout Lantern
will create the ideal environment to comfort your child's fear of the dark.
Fig 1
PRODUCT FEATURES:
• 2 light settings lets you choose constant glow or gentle blinking.
• Auto-Timer lets you choose how long you have the light on – 15, 30,
60 minutes or continuously.
• Uses 4 AAA batteries (included).
• Easy carry handle for portable use.
INSTRUCTIONS FOR USE:
How to install batteries:
1. Locate the battery cover (Fig. 2). Use a flat head screw driver to
loosen the screw.
2. Open the battery compartment door and the exhausted batteries (if
applicable).
3. Install 4 new "AAA" batteries following the diagram inside the
battery compartment.
Note: We recommend using Alkaline batteries for longer battery life.
4. Replace the battery compartment door and tighten the screw to
secure.
Note: It is time to change the batteries when the light becomes
faint or stops.
Turning On Light
1. Unpack the product.
2. Make sure batteries are properly installed.
3. Press the POWER button located on top of the unit, in the centre of
the MyBaby logo (Fig. 1). This will turn on the constant light option.
4. Press the centre of the MyBaby logo again and the light mode
moves to a soft blinking light (replicating fireflies in a jar).
5. Pressing the power button again, turns off the unit.
POWER/LIGHT
TIMER
BUTTON
TIMER LEDs
Fig 2
GB
2
I
Using The Auto-Timer
1. When the power is on and unit is glowing you may set a timer so
the unit will automatically turn off.
2. Toggle through the TIMER button (Fig. 1) until the corresponding
LED illuminates next to the time of your choice, 15, 30, or 60
minutes. The unit will automatically shut off after the selected time
and the Power LED (Fig. 1) will turn off as well.
3. Once the timer is set if you choose to use a different light option,
you may do so by pressing the Power button (located in the center
of the MyBaby logo) (Fig. 1)
Note: If you are on the soft blinking light option pressing the power,
button again will turn off the unit and turn off the timer. Pressing
the power button again will start the lantern with no timer active.
4. If you choose to use the light continuously again, toggle through the
TIMER button until the green LED light is not illuminated on any of
the time choices.
Note: Do not select the TIMER button if you wish to have the lantern
glowing continuously.
MAINTENANCE:
To Store
You may leave the unit on display, or you can store it in its box or a
cool, dry place. Batteries should be removed prior to storage.
To Clean
Wipe off dust with a damp cloth. NEVER use liquids or abrasive cleaner
to clean. Do not immerse in water.
EASY CARRY HANDLE
BATTERY DOOR

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Myb-n450-eu

Tabla de contenido