Blaupunkt BLP3795 Manual Del Usuario página 13

Function Operating Instructions
1) Play / Pause:
In the standby mode, click the power button to play the music directly, and press again to pause the playback.
2) Call Answer:
When the phone calls, click the power button to answer the call.
3) Call hang up:
When calls ended, click the power button to hang up the phone.
4) Last Number Redial:
While on standby or playing music, double-click the power button to dial the last call in your call log.
5) FM function:
The FM function works when the micro USB charging cable is plugged in and used as an antenna. In FM mode, click the
power button to search the radio, the blue lights will flash. After the searching, the blue lights will not flash any more.
Then press button "track back" for previous radio channel and button "track forward" for next radio channel.
6) TWS function:
In Bluetooth mode while playing music, long press button "M", there will be a voice prompt "ding" , means begin to
search for another device .Then start another speaker in Bluetooth mode, two units will connect automatically with a
voice prompt "ding". And music will come from both speakers at the same time.
PS: Make sure the second speaker didn't connect any phone device at that moment. Or you should dis-connect from the
phone. Otherwise it cannot make TWS pairing.
Remark
1. Boot back: When the pairing is successful, the second boot Bluetooth speaker priority back into the state automatically
connected to the connected phone.
2. Low battery prompt: When the Bluetooth speaker battery power is low, it will issue a low battery tone.
3. Click means press 1-time, long press means press and hold the button for 2-3 seconds.
Bluetooth pairing
1. Once power ON, the blue lights flash, the machine enters the search pairing state.
2. Start the phone or other equipment, Bluetooth, if it is Android system phone or device, please click on the phone
"search for Bluetooth device" option to find the device name, if the IOS system phone or device will automatically search
for equipment, when the model of the Bluetooth speaker is found, click to enter pairing. After the success of the pairing,
the speaker will be issued a successful tone, the blue lights will not flash any more, enter the connection standby state.