Operating Instructions - Kobalt KFL 124B-03 Manual Del Usuario

OPERATING INSTRUCTIONS

1. To Attach Battery Pack
a. Align the raised portion on the battery pack
with the grooves on the bottom of the tool, then
slide the battery pack onto the tool as shown.
b. Make sure that the battery-release buttons on
the battery pack snap into place and the battery
pack is secured to the tool before beginning
operation.
NOTICE: When placing the battery pack on the
tool, be sure that the raised rib on the battery pack
aligns with the groove on the tool and the latches
snap into place properly. Improper assembly of
the battery pack can cause damage to internal
components.
To Detach Battery Pack
a. Press the battery-release buttons to release the battery pack.
b. Pull forward on the battery pack to remove it from the tool.
WARNING
• Battery tools are always in operating condition. Therefore, always remove the battery from
the tool when the tool is not in use or when carrying the tool at your side.
2. ON/OFF Switch
a. To turn the floodlight ON, press the ON/OFF
switch (E). The floodlight will be turned on at
maximum brightness.
b. To reduce the brightness, press the ON/OFF
switch again.
c. To turn it OFF, press the ON/OFF switch.
NOTICE: Do not continue to press the ON/OFF
switch after the floodlight has been automatically
switched off. The battery can be damaged.
1
2
7
Battery release
buttons
E