Mode
• During maintenance charging, the 100% Charge LED will slowly flash.
Maintenance
• When the battery is topped off and fully charged again, the 100%
White LED
Charge LED will turn solid White. The charger can be left connected to
the battery at all times.
6. Understanding Advanced Diagnostics
The
will illuminate, indicating a potential error has occurred. See the following chart to
identify the issue:
12
Descriptions
Error
Reason
Reverse polarity
Cannot hold a charge
Solid
Possible short circuit
Error
LED
Wrong charging mode selection
battery voltage is too low for charger
to detect
The domestic power supply's
voltage might not match
Solution
Reverse the battery connections.
Check the battery connections, or
contact battery manufacturer.
Check the battery, or contact battery
manufacturer.
Check the charging mode.
Check the battery voltage
Check your voltage of domestic
power supply
13