Axis T8082 PS57 CHASSIS 2KW 1U Guia De Instalacion página 14

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 53
AXIS T8082 PS57 CHASSIS 2KW 1U
2. Connect the terminals on the distribution board power cable to the connectors on the
power supply.
NO TICE
TICE
NO
NO
TICE
Tighten the nuts tightly. If the terminals come loose there is a risk that they will short
circuit the connectors.
3. Put back the cover over the terminal.
4. Ground the power supply by attaching a grounding wire to the ground screw at the
back of the power supply.
1
1
Ground screw
2
Positive terminal (red)
3
Negative terminal (black)
DANGER
Risk of electric shock. The terminals on the back of the power supply are live when the
AC power cables are connected.
5. Connect the AC power cables to the back of the power supply, directly behind the two
power supply modules. If more power supply modules are added they shall all have
separate AC power cables.
6. Fasten the power supply to the mounting rack with appropriate screws.
7. Connect the distribution board power cable to AXIS T8088 Power Distribution Board.
Install the Power Supply Module
DANGER
AXIS T8081 PS57 Module 1000W is intended to be used only with AXIS T8080 PS57
Chassis 1U.
14

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

T8081 ps57

Tabla de contenido