Chapin Spot Sprayer Operator's Manual - English
WARNING
IMPROPER USE OR FAILURE TO FOLLOW INSTRUCTIONS CAN RESULT IN
EXPLOSIVE FAILURE CAUSING SERIOUS EYE OR OTHER INJURY.
FOR SAFE USE OF THIS PRODUCT YOU MUST READ AND FOLLOW ALL
INSTRUCTIONS. DO NOT LEAVE SPRAYER IN THE HOT SUN. HEAT CAN CAUSE
PRESSURE BUILD-UP RESULTING IN POSSIBLE EXPLOSION. DO NOT STORE OR
LEAVE SOLUTION IN TANK AFTER USE. ALWAYS WEAR GOGGLES, GLOVES, LONG
SLEEVE SHIRT, LONG PANTS AND FULL FOOT PROTECTION WHEN SPRAYING.
DO NOT ATTEMPT TO MODIFY THIS SPRAYER. REPLACE PARTS ONLY WITH
MANUFACTURER'S ORIGINAL PARTS.
NEVER SPRAY FLAMMABLE, CAUSTIC, ACIDIC, CHLORINE, BLEACH,
PETROLEUM BASED OR OTHER CORROSIVE SOLUTIONS OR HEAT, PRESSURE,
OR GAS PRODUCING CHEMICALS. ALWAYS READ AND FOLLOW CHEMICAL
MANUFACTURER'S INSTRUCTIONS BEFORE USE WITH THIS SPRAYER AS
SOME CHEMICALS MAY BE HAZARDOUS WHEN USED WITH THIS SPRAYER.
ENSURE THE WIRING HARNESS DOES NOT BECOME PINCHED OR DAMAGED
IN ANY WAY. THIS MAY DAMAGE THE PUMP OR CAUSE THE WIRING
HARNESS TO OVERHEAT, RESULTING IN MELT DOWN OR FIRE.
SOME CHEMICALS WILL DAMAGE THE PUMP VALVES IF ALLOWED TO
SOAK UNTREATED FOR A LONG PERIOD OF TIME. ALWAYS FLUSH THE
PUMP WITH WATER AFTER USE. DO NOT ALLOW CHEMICALS TO SIT
IN PUMP FOR EXTENDED TIMES OF IDLENESS. FOLLOW CHEMICAL
MANUFACTURERS INSTRUCTIONS ON DISPOSAL OF ALL WASTE
WATER FROM THE SPRAYER.
CAUTION
THIS SPRAYER HAS BEEN DESIGNED TO BE ATTACHED TO STABLE SURFACES.
1E