Important Safety Summary; Check Package Before Use - VELSAT AUVEL5G Manual Del Usuario

5.8 GHz Wireless Audio/Video system
AUVEL5G

0 IMPORTANT SAFETY SUMMARY

1. All the safety and operating instructions should be read before using.
2. The safety and operating instructions should be kept for future reference.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol
cleaners. Use a damp cloth for the cleaning.
4. The product should be situated away from heat sources such as radiators, stoves or
other products including amplifiers that produce heat.
5. Do not use this product near water.
6. This product should be operated only from the type of power source indicated on
the marking label.
7. Power supply cords should be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying particular attention to cords at
plugs.
8. For added protection for this product during a lightning storm or if it is left
unattended and unused for long periods of time, unplug it from the wall outlet and
disconnect cable system.
9. Unplug this product from the wall outlet and refer to qualified technical service
personnel under the following conditions:
a. If power supply cord or plug is damaged.
b. If liquid is spilled or objects falls into the products.
c. If the product does not operate normally by following the operating instructions.
1 INTRODUCTION
1.1 GENERAL OVERVIEW
AUVEL uses the latest wireless technology to send stereo audio and video pictures
around your home. Watch your favourite TV programs or listen to Hi-Fi quality stereo
sound in any part of your home without needing to run extension cables.
1.2 MAIN FEATURES
1. 5.8 GHz wireless transmitter and receiver with 8 switchable channels (DIPs Switch)
2. Antenna (5.8 GHz) is embedded into the housing.
3. PAL video format.
4. Compact size
5. Low power consumption

2 CHECK PACKAGE BEFORE USE

1 sender unit: the Sender emits Audio and Video signals over 5.8 GHz radio
frequency carrier and receives remote control signal from the receiver.
1 receiver unit: the Receiver receives 5.8 GHz wireless Audio and Video signals from
the Sender and sends remote control signals to the Sender.
2 units of Audio/Video cables: this pair of cables is used to connect the Sender and
Receiver to A/V devices.
2 units of power adapters: these power adapters supply a +9V DC power to the
Sender and Receiver units.
4
ENG