Attwood 11930-4 Instrucciones Para El Propietario

CANOE/ KAYAK CARRIER CART
11930-4
OWNER'S INSTRUCTIONS
SAVE THESE INSTRUCTIONS
ASSEMBLY:
1. Your frame has been assembled for you.
2. Slip on the wheels to the frame tubing.
3. Insert the cotter pins into the holes on the end of the wheel axles. Then fl ip the O-rings
over the ends of the axles to lock the wheels onto the axles.
USE:
1. Unfold the cart frame.
2. Place under the center of your kayak or canoe.
3. Use the provided strap to secure the boat to the cart.
Do not overtighten the straps when connecting the boat to the
cart. This could lead to damage to your boat.
4. Once at the water, you can take off the wheels and fold the frame for storage.
CARE:
1. If the cart is used in or around salt water, rinse it off to prevent corrosion.
2. Periodically check cart for wear and tear.
WARNING
!
Attwood Corporation disclaims any and all liability for damage or injury that might occur
as a result of improper use of this product. It was not designed or manufactured to carry
humans.
10/2015 69555 Rev. A
ATTWOOD LIMITED WARRANTY
This product carries a one (1) year warranty. See product catalog or
www.attwoodmarine.com for details.
© 2015 Attwood Corporation 1016 N. Monroe Street,
Lowell, MI 49331-0260 • www.attwoodmarine.com