Beyerdynamic MMX 300 Manual De Instrucciones página 5

MMX 300 – Headset
Setting up and Use of the Headset
Put the headset on your head. The microphone is on the left side. Position the
microphone to the front of the middle of the mouth. In order to avoid pop noise
you should use the microphone with a pop shield.
Headband
For best comfort and noise attenuation, the headband can be adjusted to fit
your head properly.
Wear the headset so that the headband runs over the top of your head and
adjust the headband so that
• your ears are completely enclosed by the ear cushions,
• you feel a gentle pressure around your ears,
• both ends of the headband have the same length to ensure a proper fit
Microphone
• The pop shield should enclose the microphone completely.
• Bend the flexible gooseneck so that the microphone is placed about 2 cm in
front of the middle of your mouth.
Important: In order to avoid overstretching and premature wear and tear
never bend the gooseneck more than 90°.
Connection
The MMX 300 headset is supplied
with two connecting cables.
Headset cable with a 4-pole jack
connector to connect to tablets,
smartphones and laptops.
• Turn the microphone holder (not the
gooseneck!) to position the micro-
phone as requested.
5