Maintenance - oneConcept 10030087 Manual Del Usuario

How to drop dust and clean the dust cup
1. Remove the dust cup from body.
2. Press the dust cup bottom release button,
then the dust will fall down automatically. Usu-
ally you may only do like this to drop the dust.
3. If find the plastic filter system too dirty, please
press the dust cup cover (for air exhaust) re-
lease button, take out the filter assembly out
of the dust cup, then you can clean them with
soft brush or wash them with water. You should
dry them completely before you use again.
Change or cleaning the sponge and HV cot-
ton filter
1. Remove the dust cup from body.
2. Rotate the dust cup cover anticlockwise from
"close" to "open", take out the dust cup cover.
Draw out the sponge and HV cotton filter set.
(fig. A)
3. Pull up the knob of the filter frame, and pull
out the sponge filter and HV cotton filter from
the case box. Cleaning the Sponge and HV
cotton filter by soft brush or rinse it in luke-
warm water and dry them completely before
use again.
• All the filters are washable. We recommend
you to clean the filters when feeling the suction
power becoming weak.
• The above filters should be equipped in correct
places when work the vacuum machine.
Charging products
When charging, please put the machine in
charge inside, then put the charger connected
to the outlet in the home. Charging a place near
the corner edge, lest produce harm such as trip-
ping.
16

Maintenance

Push
Dust Cup Bottom
Release Button
Plastic Centering
Filter System