Operating; Panel Description - Hiltron PROTEC3 Manual De Usuario

PROTEC3 - User's manual
4

Operating

4.1 Front panel description
PROTEC
Key switch
1
Allows to enable / disable the system. If there's
an electronic key or another command system ,
this switch has always to be turned on the "ON"
position.
Zone 24h status control LED
2
on
off
Zone 1 status control LED
3
on
off
4
Zone 2 status control LED
on
off
28
1
DISINSERITO
DISARM
INSERITO
ARM
acceso IMPIANTO DISINSERITO
ON SYSTEM DISARMED
lamp. TEMPO DI USCITA
LAMP. EXIT TIME
spento IMPIANTO INSERITO
OFF SYSTEM ARMED
3
opened zone
closed zone
opened zone
closed zone
opened zone
closed zone
RETE
MAIN POWER
USCITA
EXIT
ALLARME
ALARM
acceso TEMPO DI ENTRATA
ON ACCESS TIME
oppure ALLARME
or ALARM
lamp. MEMORIA ALLARME
LAMP. ALARM MEMORY
9 8 7
"ALARM MEMORY" LEDs
5
6
On system disabled, if the LED
flashes, these LEDs indicate which zone
caused the alarm.
Yellow LED "ALARM"
7
on
blinking
Green LED "EXIT"
8
on
blinking
off
Red LED "POWER"
9
on
off
2 3 4
ZONE CONTROL
MEMORIA ALLARME
ALARM MEMORY
6
"ALLARME"
7
during the entering time
or in alarm condition
ALARM MEMORY
(see e to identify the
5 6
zone that caused the
alarm)
system disabled
during the exiting time
system enabled
presence of main supply
absence of main supply
5