Operation Methods - Saivod 12H Manual De Instrucciones

1 Handle
2 Air Flow Regulator
3 Extending tube
4 Hose
5 Carry Handle
6 Speed control button
7 Lock clip
8 Dirt Cup
9 Hose Connector
10 Cord rewinding pedal
11 ON/OFF switch pedal
12 Floor Nozzle

OPERATION METHODS

15. Connect the hose accessories: insert the hose end into the main connector at the front and
hook it.(Fig 1)
Remove the hose accessories: Press the adaptors at both side of the hose end and then pull
the hose accessories.(Fig 2)
16. Assemble the two tubes, connect the plastic tubes to the curved end of the hose.(Fig 3)
17. Connect floor brush to the tube for cleaning: floor brush(adjusted to the type of ground)
for carpet or floor.(Fig 4)
18. Turn on the machine: insert the plug and cord into the power socket which conform to
that on the label for the power supply, and press the on/off switch pedal ,the machine
could start working.(Fig 5)
19. Adjust the vacuum power: turn the speed control button.(Fig 6)
20. Move the machine: use the handle on the top of vacuum.(Fig 7)
21. Cord rewinding: hold the plug and pull out the cord; press the cord rewinding pedal, the
power cord will be drawn in.(Fig 8)
Power cord
The power cord is located at the rear of the vacuum. Gently pull out the power cord, watching