Chicco Polly Progress Manual Del Usuario página 8

INSTRUCTIONS FOR USE
IMPORTANT
PLEASE READ THESE
I N S T R U C T I O N S
CAREFULLY
KEEP THEM FOR FU-
TURE REFERENCE.
WARNING: BEFORE USE, RE-
MOVE AND DISPOSE OF ALL
PLASTIC BAGS AND PACKAGING
MATERIALS AND KEEP THEM
OUT OF REACH OF CHILDREN.
WARNINGS
• WARNING: Failure to respect these
instructions may compromise your
child's safety.
• WARNING: The seat CANNOT be
used alone; it must be used only
in combination with the stool
structure.
• WARNING: The seat is compatible
with the CHICCO "polly progress5"
highchair structure only.
• WARNING: Before using, make sure
that the seat is properly locked on the
stool structure.
• WARNING: Ensure that the person
using the seat knows how to use it
safely. Do not allow anyone to use
the product if they have not read
and understood all warnings and
instructions.
• WARNING: The product must be
assembled by an adult.
• WARNING: Before assembly check
that the product and all its compo-
nents don't show signs of damage
-
caused by transportation.
• WARNING: Do not use the seat if it
has any broken or damaged parts.
• WARNING: When not in use, the
seat must be kept out of the reach
AND
of children.
• WARNING: Do not use the seat with
more than one child at time.
• WARNING: Before mounting the
seat on the stool structure, make
sure that the structure is properly
fastened and all its components are
assembled correctly.
• WARNING: Do not step up on the
stool.
COMPONENTS
A – Seat
B - Stool structure
C - Seat rear fastener
D - Seat front pins
E - Seat release sliding buttons
F - Leg rest
G - Leg rest adjustment buttons
H - Rear fastener slot
I - Front pin fastening holes
CLEANING & MAINTENANCE
Clean with a soft cloth soaked in water. Never use abrasive
detergents or solvents.
USE
The highchair can be used in stool mode for children aged
36 months and older and weighing up to 30 kg.
INSTALLATION
To install the seat "A" correctly on the stool structure "B":
1) Fold the leg rest "F" using the side adjustment buttons "G"
and making it turn completely to the back of the struc-
ture until it reaches closed position (Fig. 1-2).
WARNING: When using the seat, the leg rest must be kept
in closed position.
2) Take the seat "A" from the sides and insert the rear fasten-
er "C" in the slot "H" on the stool "B" (Fig. 3-4).
3) Then turn the front part of the seat "A" down and push on
the front part until you hear the engagement click of the
front pins "D" in the holes "I" in the stool structure (Fig. 5).
REMOVAL
To remove the seat "A" correctly from the stool structure "B":
1) Lower the stool structure surface following the instruc-
8
2)
WA
Th
no
for
of
ev
ple
ca