Cleaning And Care - Sharp EJ-12GDW Manual De Instrucctiones

HOW TO USE
TO CRUSH ICE
The ice crush function automatically operates as a pulse function.
While the blender is turned on (On Indicator Light will be on.), press and release the Ice Crush pad until ice is
crushed.
TO USE PULSE MODE
While the blender is turned on (On Indicator Light will be on.), press the Pulse pad.
Both On Indicator Light and Pulse Indicator light will flash. Press and release the desired speed pad.
NOTE:
The pulse function is effective in starting the blending process when you do not want continuous power or when
processing items which do not require an extended amount of blending.
MIXING GUIDE
Use the following chart for speed selections.
FUNCTION
SPEED
1 Mix
2 Chop
3 Grate
4 Puree
Liquefy
5
Ice crush

CLEANING AND CARE

NOTE: • Always clean the blender after using.
• Be sure the blender is unplugged from the outlet before removing parts or cleaning.
• Do not immerse the body, cord or plug in water.
• Be sure to use dish detergent, not cleanser, benzene, thinner, alcohol or a nylon scrubbing brush
because they may cause cracks and rust.
BASE / CONTROL PANEL
Wipe carefully with a cloth dampened
with a mild detergent solution on the
outside of the base.
Wipe again with rinsed cloth and
polish dry.
EXAMPLE OF INGREDIENT / RECIPE
Salad dressings, Mayonnaise
Nuts, Vegetables
Bread crumbs
Baby food, Shake
Frozen cocktail, Smoothie
Ice
JAR / LID / POUR LID / JAR BASE
BLADE ASSEMBLY / GASKET
Remove the jar from the base. Twist the jar base
off by turning counter-clockwise.
Remove the blade assembly and the gasket.
Wash in mild, sudsy water. Rinse and polish dry.
The jar is also dishwasher-proof.
6