Westward 23V746 Manual De Instrucciones De Operación Y Piezas página 2

Westward Operating Instructions and Parts Manual
Dimensions
Overall Dimension: (In±10%)
Receiver: 2-7/32x1-13/32x7-11/16;
Transmitter: 1-13/32x2-13/32x4-11/16
Be extremely careful when working around AC circuits, shock hazards may exist.
Do not use in cardiac care areas.
If used on a circuit controlled by a dimmer, turn the dimmer to the highest position.
Refer all indicated problems to a qualified electrician.
Operation Instructions
Self- Function Check before testing
1. Turn on the receiver, you will hear a beeping and see a red LED light.
2. Connect the transmitter to the receptacle. Move the receiver's scanning head over the
face of the transmitter as shown in picture 3, it will beep at higher frequency or even
change to a continuous sound if closer to transmitter. The signal LED should turn green
when the scanning head detects a signal.
Picture 3
Note on ON/OFF/RESET button:
a. To turn on the receiver, press and release the button immediately. You will hear a
steady beeping and see a red LED, which indicates the scanning begins.
b. To turn off the receiver, press and hold the button for at least one second.
c. To reset all scanning function memory to zero, press and release the button
immediately when the receiver is on. You will hear a steady beeping, and see a red
LED.
Circuit Breaker Finder
2
23V746