Etherma solamagic Externe Dimmbox ARC Instrucciones De Montaje Y Uso página 78

Installation instructions (continued)
Connection module S1 ARC
Important: do not open the connection module, all installation steps are
performed from outside
• Pull the mains power lead out of the radiant heater.
• Attach the connection module at the plug end of the radiator and secure using
2-off M4x10 Allen screws and 2-off 4.3 mm serrated washers.
• Insert the plug-in connector of the connection module in the panel connector of
the basic device.
• Plug the mains lead into the connection module and switch on the power.
78
11/2019