SNOOZE SET
Under the alarm mode, press SNOOZE button into snooze mode, 9 minutes later the alarm will
activate again, continued for 60 minutes, press ALM OFF button to turn off the alarm
FM RADIO MODE
1、Press the POWER button to power on, FM is the default mode
2、 Manual searching: short press HOUR and MIN button for manual searching
3 、 Auto searching: long press HOUR and MIN button for more than 2 seconds into auto searching
4 、Program stations: short press MEM button to obtain the preset stations, the LED will display "P01,
P02", then press MEM button into next station, 3 seconds later the LED will display the FM frequency. If
without press any buttons, will exit the clock display 5 seconds later
5、Memory stations: select the station that you need memorized, long press MEM button for 2-3
seconds, then "P01" on the LED display will blink, press the HOUR and MIN button to select the
memorized stations, then short press MEM button confirm
AUTO POWER OFF (SLEEP MODE)
Under power on mode, press SLEEP / ALM OFF button, the LED will blink display"90"(for 5
seconds). When blinking repeat press SLEEP / ALM OFF button , can set
90→60→45→30→15→10-OFF different auto power off time, 5 seconds later after setting the
time, the unit will auto confirm the set and start the auto power off function. If need power off
midway, you only need press POWER button. Check or change the auto power off time, after
start the auto power off function, press the SLEEP button will display the remained auto power
off time, press SLEEP button again, it will display the next level power off time (Such as, if
setting "30" minutes, 2 minutes later you check will display "28", then you press SLEEP button,
you find it will display the next level "15" minutes). If you need close the auto power off under
non-stop mode, you can press SLEEP / ALM OFF button until the LED display "TIME", then
the auto power off function canceled
VOLUME ADJUST
Press VOL- or VOL+ button adjust to your desired volume, total 16 volume levels, default
volume level is 9
TIME MAINTAIN
Install the batteries, under standby mode, setting the time and turn off the AC power, can
meet the current time when you power on for anytime (If without the batteries, when power
on, the time will default "12:00")