Before Use - Pur Line HYDRO 9 Manual De Instrucciones

BEFORE USE

• Before you start up the humidifier, select a location that is firm, level, and flat. Place the humidifier on a water-
resistant surface, as water can damage furniture and floor. Do not place the humidifier directly on carpet,
towels, blankets or other absorbent surfaces.
• It is important to make sure the floater and the energy ring are installed properly.
• Do not add essential oils into the water tank. Essential oils may cause damage and leakage to the device.
• Distilled water or pure water works perfect for anti-mold function.
• We recommend cleaning once a week to prevent bacteria and mold. The water in the water tank should be
drained up when it is not in use. Otherwise it may cause unpleasant odors.
• Please do not use this humidifier on a temperature below 0°C. Recommended working environment:
10°C-40°C, relative humidity is less than 80%. Suitable water temperature: 10°C -40°C.
• To prevent the water from spilling out of the water tank, please do not open the cover when working.
• Make sure water has been filled in the water tank before turning it on.
USE
1. Take the lid off, install the floater into the water tank, and put the energy ring into the floater.
Note: put the smooth side of the energy ring face up.
2. Add some water into the tank.
Note: Please make sure the machine is powered-off when adding water.
3. Cover the lid, plug in the power supply and press the "Power'' button to turn it on, then choose the mist level
you need.
NOTE:
The water level must not be above the maximum level, otherwise the humidification will be reduced or the appliance
will not work properly.
If the water level is too low, the appliance will stop humidifying and go into standby mode and the water drop icon will
light up on the display as a water shortage indicator.
AROMATHERAPY FUNCTION:
1. Place the pads for essential oil in the aromatherapy trays.
2. Add a few drops of essential oil.
EN
2 water filling modes:
8