18"
(45.7 cm)
1-1/4"
(3.2 cm)
11-1/4"
(28.6 cm)
2-1/2"
(6.4 cm)
1-1/2" OD
Product Information
Applicable product:
Drop-in rim style
Fixture*:
Bathing well:
Basin area, bottom
51-3/8" (130.5 cm) x 21" (53.3 cm)
Basin area, top
64-1/2" (163.8 cm) x 30-1/2" (77.5 cm)
Weight
110 lbs (50 kg)
To overflow:
Water depth
15" (38.1 cm)
Capacity
72 gal (273 L)
* Approximate measurements for comparison only.
Drop-in cutout dimensions:
70-1/2" (179.1 cm) x 34-1/2" (87.6 cm)
Pump:
1-speed
Pump is supplied with 24" (61 cm) grounding-type plug-in
cord.
Minimum access panel pump/control:
20" (50.8 cm) W x 15" (38.1 cm) H
1063764-1-D
72" (182.9 cm)
3/4" (1.9 cm)
K-1124
V
Hz
A
120
60
7
required
No change in measurements if connected
with drain illustrated. (K-7272)
Pump/Control Access
19"
(48.3 cm)
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Locate the outlet behind the whirlpool and within 24" (61 cm)
of the pump.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
41 lbs/square foot (201 kg/square meter) loading.
This product is designed for drop-in installation only. It is not
suited for use in a three-wall alcove with an overhead shower.
The hot water supply should be 70% of the capacity of the bath or
greater. Installations will vary.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
2
1-1/2"
(3.8 cm)
Drop-in Rim Detail
36" (91.4 cm)
120 V, 15 A, 60 Hz
Kohler Co.