Greenice TB-LK-TIME Manual De Instrucciones página 12

3) Once you have made you selection, press the button "Time Set" again to
select the minutes.
4) It is possible to change the current minutes using the regulation and
buttons.
5) After selecting the desired hour and minutes, press the
confirm your settings.
Time control function
This function is similar to the timer. The controller is launched with a precise time chip
that works precisely when you select the exact time. Once you have chosen the selected
time, the controller can be reset automatically and the settings will not change even if
you lose power.
When you select this function, the digit on the left of the digital panel is 2, which shows
that the controller is working with the function to control the time and can change to
up to 5 different scenes including time and brightness. This is done by:
 Timer.
1) Press the "Scene Set" button once and the digital panel will blink showing
that it can be changed.
There are 3 digits:
o The first (from 1-5) shows the scene number to select.
o The second shows the hour to select.
o The third shows the minutes to select.
2) You can change the brightness settings using the regulation and
buttons.
3) Once you have made your selection, press the button "Scene Set" again to
select the time settings.
o The time range must be between 0-24h.
o The minute range must be between 0-59min.
button to