Glacier bay FS6AC071CP Guía De Instalación Y Cuidado página 6

Installation (continued)
5
Installing the stopper and ball rod
NOTE: In shallow cabinet installations, the ball rod (T)
may need to be shortened. Use a hack saw to cut the
end of the rod, away from the ball, to the desired length.
Insert the pop up stopper (I) into the drain hole in
the sink.
Remove the spring clip (S) from the ball rod (T).
Remove the ball nut (O). Insert the ball rod (T) into
the drain body (M) and through the hole of the pop
up stopper (I). See insert 1.
For easier removal and cleaning, rotate the pop up
stopper (I) 90 degrees so that the ball rod (T) does
not go through the hole in the pop up stopper (I).
See insert 2.
Secure the ball nut (0) and bushing (N), against
the hole in the drain body (M) and tighten the ball
nut (O) onto the threaded end. Do not overtighten.
I
1
M
Insert 1 Insert 2
O
1
2
N
M
1
3
6
Installing the lift rod
Tighten the thumb screw (Q).
S
T
6
2
1
Q
R
Q